Khác biệt giữa bản sửa đổi của “Lớp phủ (địa chất)”

Nội dung được xóa Nội dung được thêm vào
Trang mới: nhỏ|350px|Mặt cắt của [[Trái Đất từ lõi tới tầng ngoài (quyển ngoài) của khí quyển.]] '''L...
 
Không có tóm lược sửa đổi
Dòng 19:
{{đang dịch|ngôn ngữ = tiếng Anh}}
== Đặc trưng ==
Lớp phủ về bản chất khác lớp vỏ ở các đặc trưng cơ học và thành phần [[hóa học]] của nó. Khác biệt giữa hai lớp được dựa trên các đặc trưng hóa học, kiểu đá, lưu chấn học và địa chấn học. Trên thực tế, lớp vỏ là sản phẩm của sự nóng chảy của lớp phủ. Sự nóng chảy một phần của vật liệu lớp phủ được coi là nguyên nhân làm cho các nguyên tố không tương thích với nhau bị tách ra khỏi đá lớp phủ, với các vật chất ít nặng hơn bị nổi lên trên thông qua các khe hở, vết nứt hay các rãnh nứt, bị nguội đi và đông đặc lại ở bề mặt.Các loại đá lớp phủ điển hình có tỷ lệ [[magiê]] trên [[sắt]] cao hơn và tỷ lệ nhỏ hơn của [[silic]] và [[nhôm]] so với lớp vỏ. Kiểu tỷ lệ như vậy cũng được dự báo bằng các thực nghiệm làm nóng chảy một phần các loại đá được cho là đại diện của lớp phủ Trái Đất.
The mantle differs substantially from the crust in its mechanical characteristics and its [[chemical]] composition. The distinction between crust and mantle is based on chemistry, rock types, rheology and seismic characteristics. The crust is, in fact, a product of mantle melting. Partial melting of mantle material is believed to cause incompatible elements to separate from the mantle rock, with less dense material floating upward through pore spaces, cracks, or fissures, to cool and freeze at the surface. Typical mantle rocks have a higher magnesium to iron ratio, and a smaller portion of [[silicon]] and [[aluminium]] than the crust. This behavior is also predicted by experiments that partly melt rocks thought to be representative of Earth's mantle.
 
[[Hình:Earthquake wave paths.gif|nhỏ|trái|Lập bản đồ phần bên trong của [[Trái Đất]] với sóng [[động đất|địa chấn]].]]
[[Image:Earthquake wave paths.gif|thumb|left|Mapping the interior of the [[Earth]] with [[earthquake]] waves.]] Mantle rock shallower than about 400 km depth consists mostly of [[olivine]]<ref name="eis">{{cite web |url=http://geology.com/nsta/earth-internal-structure.shtml
Đá lớp phủ nằm nông hơn khoảng 400 km độ sâu bao gồm chủ yếu là [[olivin]]<ref name="eis">{{cite web |url=http://geology.com/nsta/earth-internal-structure.shtml
|title=Earth's Internal Structure – Crust Mantle Core – Geology.com |accessdate=2007-12-26}}</ref>, [[pyroxene]]s, [[spinel]], and [[garnet]]<ref name="burns"/><ref name="aus">{{cite web |url=http://www.amonline.net.au/geoscience/earth/structure.htm#mantle |title=Geoscience: the earth: structure… |publisher=Australian Museum |date=2004 |accessdate=2007-12-26}}</ref>; typical rock types are thought to be [[peridotite]],<ref name="burns"/> [[dunite]] (olivine-rich peridotite), and [[eclogite]]. Between about 400 km and 650 km depth, olivine is not stable and is replaced by high pressure [[polymorphism (materials science)|polymorphs]] with approximately the same composition: one polymorph is [[wadsleyite]] (also called ''beta-spinel'' type), and the other is [[ringwoodite]] (a mineral with the ''gamma-[[spinel]]'' structure). Below about 650 km, all of the minerals of the upper mantle begin to become unstable; the most abundant minerals present have structures (but not compositions) like that of the mineral [[perovskite]]. The changes in mineralogy at about 400 and 650 km yield distinctive signatures in seismic records of the Earth's interior, and like the moho, are readily detected using seismic waves. These changes in mineralogy may influence [[mantle convection]], as they result in density changes and they may absorb or release latent heat as well as depress or elevate the depth of the polymorphic phase transitions for regions of different temperatures. The changes in mineralogy with depth have been investigated by laboratory experiments that duplicate high mantle pressures, such as those using the [[diamond anvil]]<ref name="squeeze">
|title=Earth's Internal Structure – Crust Mantle Core – Geology.com |accessdate=8-10-2008}}</ref>, [[pyroxen]], [[spinel]] và [[đá thạch lựu|thạch lựu]]<ref name="burns"/><ref name="aus">{{cite web |url=http://www.amonline.net.au/geoscience/earth/structure.htm#mantle |title=Geoscience: the earth: structure… |publisher=Australian Museum |date=2004 |accessdate=8-10-2008}}</ref>; các kiểu đá điển hình được cho là [[peridotit]],<ref name="burns"/> [[dunit]] (peridotit giàu olivin) và [[eclogit]]. Giữa độ sâu khoảng 400 km và 650 km, olivin không ổn định và bị thay thế bằng các dạng [[đa hình (vật liệu)|đa hình]] áp suất cao với xấp xỉ cùng một thành phần: một đa hình là [[wadsleyit]] (hay kiểu ''beta-spinel''), còn đa hình kia là [[ringwoodit]] (khoáng vật với cấu trúc kiểu ''gamma-[[spinel]]''). Dưới độ sâu 650 km, tất cả các loại khoáng vật của lớp phủ trên bắt đầu trở thành không ổn định; các khoáng vật phổ biến nhất hiện diện có cấu trúc (nhưng không phải thành phần) tương tự như cấu trúc của khoáng vật [[perovskit]]. Các thay đổi trong thành phần khoáng vật ở độ sâu khoảng 400 tới 650 km sinh ra các dấu hiệu đặc trưng để phân biệt trong các hồ sơ địa chấn của phần bên trong Trái Đất, và giống như "moho", chúng dễ dàng được phát hiện bằng việc sử dụng sóng địa chấn. Các thay đổi khoáng vật học này có thể ảnh hưởng tới [[đối lưu lớp phủ]], do chúng tạo ra các thay đổi về tỷ trọng và chúng có thể hấp thụ hay giải phóng [[ẩn nhiệt]] cũng như làm giảm xuống hay tăng lên độ sâu của sự chuyển tiếp pha đa hình cho các khu vực có nhiệt độ khác nhau. Các thay đổi trong thành phần khoáng vật học theo độ sâu đã được điều tra trong các thực nghiệm phòng thí nghiệm sao chép lại áp suất cao lớp phủ, chẳng hạn trong các thực nghiệm sử dụng [[đe kim cương]]<ref name="squeeze">
{{cite web |url=http://geology.about.com/library/weekly/aa030898.htm |title=The Big Squeeze: Into the Mantle |last=Alden |first=Andrew |accessdate=20078-1210-252008 |publisher=About.com}}</ref>.
 
{| align="center" cellpadding="3" cellspacing="0" border="1" width="50%"
|+ '''Composition of Earth's mantle in weight percent'''<ref name="mantle everything">[http://everything2.com/index.pl?node=Mantle mantle@Everything2.com]. Retrieved 2007-12-26.</ref>
|- bgcolor="#f0f0f0" align="center"
! width="14%" | ElementNguyên tố
! width="12%" | AmountTỷ lệ phần trăm
! width="2%" bgcolor="#ffffff" rowspan="10" | &nbsp;
! width="14%" | CompoundHợp chất
! width="12%" | AmountTỷ lệ phần trăm
|-
| bgcolor="#f0f0f0" align="center" | [[OxygenÔxy|O]]
| align="right" | 44.841,0-47,7
| bgcolor="#f0f0f0" align="center" | &nbsp;
| align="right" | &nbsp;
|-
| bgcolor="#f0f0f0" align="center" | [[SiliconSilic|Si]]
| align="right" | 21.,7-22,5
| bgcolor="#f0f0f0" align="center" | [[SiliconĐiôxít dioxidesilic|SiO<sub>2</sub>]]
| align="right" | 46,4-48,1
|-
| bgcolor="#f0f0f0" align="center" | [[MagnesiumMagiê|Mg]]
| align="right" | 22.18,8-23,5
| bgcolor="#f0f0f0" align="center" | [[MagnesiumÔxít oxidemagiê|MgO]]
| align="right" | 37.831,1-39,0
|-
| bgcolor="#f0f0f0" align="center" | [[IronSắt|Fe]]
| align="right" | 5.8,9-9,9
| bgcolor="#f0f0f0" align="center" | [[WüstiteWüstit|FeO]]
| align="right" | 7.5,6-12,7
|-
| bgcolor="#f0f0f0" align="center" | [[AluminiumNhôm|Al]]
| align="right" | 1,6-2.,2
| bgcolor="#f0f0f0" align="center" | [[AluminiumÔxít oxidenhôm|Al<sub>2</sub>O<sub>3</sub>]]
| align="right" | 3,1-4.2,1
|-
| bgcolor="#f0f0f0" align="center" | [[CalciumCanxi|Ca]]
| align="right" | 1,6-2.3,4
| bgcolor="#f0f0f0" align="center" | [[Calcium oxide|CaO]]
| align="right" | 3.2,3-3,3
|-
| bgcolor="#f0f0f0" align="center" | [[SodiumNatri|Na]]
| align="right" | 0.3,2-0,8
| bgcolor="#f0f0f0" align="center" | [[SodiumÔxít oxidenatri|Na<sub>2</sub>O]]
| align="right" | 0.4,3-1,1
|-
| bgcolor="#f0f0f0" align="center" | [[PotassiumKali|K]]
| align="right" | 0.03-0,1
| bgcolor="#f0f0f0" align="center" | [[PotassiumÔxít oxidekali|K<sub>2</sub>O]]
| align="right" | 0.04-0,1
|-
| bgcolor="#f0f0f0" align="center" | Sum
| align="right" | 99.7
| bgcolor="#f0f0f0" align="center" | Sum
| align="right" | 99.1
|}
 
Why isgiải thecho innerviệc coretại solid,sao thelớp outerlõi coretrong liquidrắn, andlớp thelõi mantlengoài solidlỏng còn lớp phủ thì ở dạng rắn/plastic?dẻo The answerdo dependssự bothphụ onthuộc thevào relativeđiểm meltingnóng pointschảy oftương theđối differentcủa layerscác lớp khác nhau (nickel-ironlớp corelõi niken-sắt, silicatelớp crustvỏ and mantlelớp phủ là silicat) andcũng như do sự gia tăng về nhiệt độ on theáp increasesuất inkhi temperaturedi andchuyển pressurexuống assâu onehơn movesvaòp deeperbên intotrong theTrái EarthĐẤT. At the surface both nickel-iron alloys and silicates are sufficiently cool to be solid. In the upper mantle, the silicates are generally solid (localised regions with small amounts of melt exist); however, as the upper mantle is both hot and under relatively little pressure, the rock in the upper mantle has a relatively low viscosity. In contrast, the lower mantle is under tremendous pressure and therefore has a higher viscosity than the upper mantle. The metallic nickel-iron outer core is liquid despite the enormous pressure as it has a melting point that is lower than the mantle silicates. The inner core is solid due to the overwhelming pressure found at the center of the planet<ref name="louie">
{{cite web |url=http://www.seismo.unr.edu/ftp/pub/louie/class/100/interior.html |title=Earth's Interior |last=Louie |first=J. |date=1996 |accessdate=2007-12-24 |publisher=University of Nevada, Reno}}</ref>.